{"title":"AEV Gladiator JT350\/JT370 Parts \u0026 Accessories","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eFollowing in the steps of AEV’s Brute Double Cab, Jeep finally gave the purists what they always wanted – a mass produced, Wrangler-based pickup Jeep Gladiator truck.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe overwhelming appeal of the AEV Jeep Gladiator lies within its versatility, offering customers the functionality and utility of a pickup truck, combined with the off-road prowess of a Jeep Wrangler. AEV’s JT350 and JT370 packages for the AEV Jeep Gladiator elevate this iconic vehicle to the next level as both a daily commuter and as an off-road adventure vehicle.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"aev-ex-front-bumper-for-jl-wrangler-and-jt-gladiator","title":"AEV EX Front Bumper for JL Wrangler and JT Gladiator","description":"\u003ch3\u003e\u003cstrong\u003eFULL-WIDTH PROTECTION. SHORT BUMPER CLEARANCE.\u003c\/strong\u003e\u003c\/h3\u003e\r\nThe full-width design of the AEV EX Front Bumper offers maximum protection for the vital front suspension components that can often leave a vehicle disabled when damaged in a collision. It also helps direct air up and over the fender flares instead of trapping the air inside the flare, which increases drag and reduces fuel economy. These benefits do not come at the expense of limiting tire size, decreased tire clearance, or approach angle. In fact, the EX Front Bumper sits higher and tighter to the body, giving it a better approach angle than the factory winch bumper.\r\n\u003ch3\u003e\u003cstrong\u003eHOT STAMPED BORON STEEL CONSTRUCTION\u003c\/strong\u003e\u003c\/h3\u003e\r\nThe AEV EX Front Bumper is manufactured out of Hot Stamped Boron Steel (HSBS) and features an OE-quality, multi-stage E-coat\/powder coat finish for maximum corrosion and UV resistance. Hot Stamped Boron Steel is an ultra-high strength, press hardened steel that is commonly used in automotive applications for passenger impact protection because it is lightweight with an extremely high yield strength. The complete EX Front Bumper weighs approximately 110 pounds, yet it is stronger than a bumper weighing twice as much.\r\n\u003ch3\u003e\u003cstrong\u003eSUPERIOR WINCH ACCESS AND VISIBILITY\u003c\/strong\u003e\u003c\/h3\u003e\r\nWhat good is a winch bumper if it is difficult to use? The factory winch bumper allows mounting a winch to your vehicle, but the clutch handle can be difficult to access and the winch line visibility when spooling your winch is very poor. The carefully thought-out profile of the EX Front Bumper solves both of these issues, offering plenty of accessibility to the clutch and a better view of your winch line during recovery operations – even with hoop mounted lights!\r\n\u003ch3\u003e\u003cstrong\u003eVISIBILITY OVER ANY TERRAIN\u003c\/strong\u003e\u003c\/h3\u003e\r\nLighting is a critical component to traveling safely through remote backcountry, so the EX Front Bumper allows for the installation of AEV 7000 Series LED Off-Road Lights underneath the center hoop with the use of the optional Off-Road Light Brackets (sold separately). This allows easy access to the winch and its components. All various OEM fog light options are compatible with the EX Front Bumper and install seamlessly with the supplied brackets and bezel.\r\n\r\nIf you are looking to maximize light output to illuminate the ground in front of you and help cut through fog, snow, or heavy dust and silt, you can add a 20” lightbar behind our optional Front Bumper Skid Plate (sold separately) using the optional Front Bumper Skid Plate Light Mount (sold separately).\r\n\r\nAdditionally, a Trail Cam Relocation Kit is available to relocate the camera to underneath the center hoop for an unobstructed view of the trail head.\r\n\u003ch3\u003e\u003cstrong\u003eREADY FOR ANYTHING\u003c\/strong\u003e\u003c\/h3\u003e\r\nThe AEV EX Front Bumper is up for any recovery task that may present itself, with two Hi-Lift Jack guides and a pair of heavy-duty, chassis-mounted recovery points that are tested to meet all OE load specifications and are appropriately sized for ¾” anchor shackles. A 10,000lb Warn Zeon 10-S winch (or other similarly sized winches) can be added to the EX Front Bumper with the use of our optional Winch Mount. An Optional Non-Winch Cover Plate is available for customers who don’t plan on installing a winch and wish to cover up the winch opening.\r\n\u003ch3\u003e\u003cstrong\u003ePROUDLY MADE IN THE USA\u003c\/strong\u003e\u003c\/h3\u003e\r\nAEV is committed to US manufacturing to bring you the best quality, materials, and craftsmanship. The multi-stage e-coat\/powder-coated AEV EX Front Bumper is proudly designed, tested, and manufactured right here in the USA and carries a lifetime structural warranty and a 1-year warranty against corrosion – both applicable to the original purchaser and from the original date of purchase.\r\n\r\n \r\n\r\n\u003csection class=\"product__features\"\u003e\r\n\u003cdiv class=\"product__features Grid-cell\"\u003e\r\n\r\n\u003cstrong\u003eKey Features:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n \t\u003cli\u003eFits JL Wrangler\/Gladiator\u003c\/li\u003e\r\n \t\u003cli\u003eFull-width corner protection\u003c\/li\u003e\r\n \t\u003cli\u003eSatin Textured Black\u003c\/li\u003e\r\n \t\u003cli\u003eModular design allows for additional corner configurations\u003c\/li\u003e\r\n \t\u003cli\u003eHot-Stamped Boron Steel (HSBS)\u003c\/li\u003e\r\n \t\u003cli\u003eCompatible with Warn Zeon winches\u003c\/li\u003e\r\n \t\u003cli\u003eRoto-molded hoop assembly\u003c\/li\u003e\r\n \t\u003cli\u003eCompatible w\/ OEM fog lights and a pair of 7″ Off-Road Lights\u003c\/li\u003e\r\n \t\u003cli\u003eOE-grade E-coat and powder coat finish\u003c\/li\u003e\r\n \t\u003cli\u003eFront Trail Cam Compatible\u003c\/li\u003e\r\n \t\u003cli\u003eMade in the USA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eKey Features:\u003c\/strong\u003e\r\n\r\nDifficulty Level: Advanced\r\nEstimated Install Time: 6-8 Hours\r\n\r\n\u003c\/div\u003e\r\nInstallation Video: \u003ca href=\"https:\/\/www.youtube.com\/watch?v=RlovY-lGUCM\" target=\"_blank\" rel=\"noopener\"\u003eClick Here\u003c\/a\u003e\r\n\r\n\u003c\/section\u003e","brand":"AEV","offers":[{"title":"AEV Non-Winch Cover Plate","offer_id":48681193963777,"sku":"12301200AA","price":2477.0,"currency_code":"USD","in_stock":true},{"title":"AEV Winch Mount","offer_id":48681193996545,"sku":"12301200AA + Winch Mount","price":2495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/8827c054-EX_High_KIT-1-scaled.jpg?v=1769733649"},{"product_id":"aev-rx-front-bumper-for-jl-wrangler-and-jt-gladiator","title":"AEV RX Front Bumper for JL Wrangler and JT Gladiator","description":"\u003ch3\u003e\u003cstrong\u003eAGGRESSIVE STYLE. MAXIMUM CLEARANCE.\u003c\/strong\u003e\u003c\/h3\u003e\r\nThe AEV 2018 Jeep Wrangler\/Gladiator RX Front Bumper has all the same core features as our EX Front Bumper, but it includes short corners instead of the full-width corners for a more aggressive look and maximum tire clearance. This is a great option for anyone running aftermarket fender flares with tires over 40” tall. Additionally, the AEV RX Front Bumper itself sits both higher and tighter to the body and with a better approach angle than the factory winch bumper. If you are looking for a bumper without limitations, this is it!\r\n\u003ch3\u003e\u003cstrong\u003eHOT STAMPED BORON STEEL CONSTRUCTION\u003c\/strong\u003e\u003c\/h3\u003e\r\nThe AEV 2018 Jeep Wrangler\/Gladiator RX Front Bumper is manufactured out of Hot Stamped Boron Steel (HSBS) and features an OE-quality, multi-stage E-coat\/powder coat finish for maximum corrosion and UV resistance. Hot Stamped Boron Steel is an ultra-high strength, press hardened steel that is commonly used in automotive applications for passenger impact protection because it is lightweight with an extremely high yield strength. The complete RX Front Bumper weighs approximately 90 pounds, yet it is stronger than a bumper weighing twice as much.\r\n\u003ch3\u003e\u003cstrong\u003eSUPERIOR WINCH ACCESS AND VISIBILITY\u003c\/strong\u003e\u003c\/h3\u003e\r\nWhat good is a winch bumper if it is difficult to use? The factory winch bumper allows mounting a winch to your vehicle, but the clutch handle can be difficult to access and the winch line visibility when spooling your winch is very poor. The carefully thought-out profile of the RX Front Bumper solves both of these issues, offering plenty of accessibility to the clutch and a better view of your winch line during recovery operations – even with hoop mounted lights!\r\n\u003ch3\u003e\u003cstrong\u003eVISIBILITY OVER ANY TERRAIN\u003c\/strong\u003e\u003c\/h3\u003e\r\nLighting is a critical component to traveling safely through remote backcountry, so the RX Front Bumper allows for the installation of AEV 7000 Series LED Off-Road Lights underneath the center hoop with the use of the optional Off-Road Light Brackets (sold separately). This allows easy access to the winch and its components. All various OEM fog light options are compatible with the RX Front Bumper and install seamlessly with the supplied brackets and bezel.\r\n\r\nIf you are looking to maximize light output to illuminate the ground in front of you and help cut through fog, snow, or heavy dust and silt, you can add a 20” light bar behind our optional Front Bumper Skid Plate (sold separately) using the optional Front Bumper Skid Plate Light Mount (sold separately).\r\n\r\nAdditionally, a Trail Cam Relocation Kit is available to relocate the camera to underneath the center hoop for an unobstructed view of the trail head.\r\n\u003ch3\u003e\u003cstrong\u003eREADY FOR ANYTHING\u003c\/strong\u003e\u003c\/h3\u003e\r\nThe AEV 2018 Wrangler\/Gladiator RX Front Bumper is up for any recovery task that may present itself, with two Hi-Lift Jack guides and a pair of heavy duty, chassis-mounted recovery points that are tested to meet all OE load specifications and are appropriately sized for ¾” anchor shackles. A 10,000lb Warn Zeon 10-S winch (or other similarly sized winches) can be added to the RX Front Bumper with the use of our optional Winch Mount. An Optional Non-Winch Cover Plate is available for customers who don’t plan on installing a winch and wish to cover up the winch opening.\r\n\u003ch3\u003e\u003cstrong\u003ePROUDLY MADE IN THE USA\u003c\/strong\u003e\u003c\/h3\u003e\r\nAEV is committed to US manufacturing to bring you the best quality, materials, and craftmanship. The RX Front Bumper is proudly designed, tested, and manufactured right here in the USA and carries a lifetime structural warranty and a 1-year warranty against corrosion – both applicable to the original purchaser and from the original date of purchase.\r\n\r\n \r\n\r\n\u003csection class=\"product__features\"\u003e\r\n\u003cdiv class=\"product__features Grid-cell\"\u003e\r\n\r\n\u003cstrong\u003eKey Features:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n \t\u003cli\u003eFits 2018+ JL Wrangler and 2019+ Gladiator (all trim levels)\u003c\/li\u003e\r\n \t\u003cli\u003eAggressive, high clearance design\u003c\/li\u003e\r\n \t\u003cli\u003eHot-Stamped Boron Steel (HSBS)\u003c\/li\u003e\r\n \t\u003cli\u003eCompatible with Warn Zeon winches\u003c\/li\u003e\r\n \t\u003cli\u003eRoto-molded hoop assembly\u003c\/li\u003e\r\n \t\u003cli\u003eCompatible w\/ OEM fog lights\u003c\/li\u003e\r\n \t\u003cli\u003eOE-grade e-coat and powder coat finish\u003c\/li\u003e\r\n \t\u003cli\u003eFront Trail Cam Compatible\u003c\/li\u003e\r\n \t\u003cli\u003eMade in the USA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003c\/section\u003e\u003csection class=\"product__features\"\u003e\r\n\u003cdiv class=\"product__features Grid-cell\"\u003e\r\n\r\n\u003cstrong\u003eKey Features:\u003c\/strong\u003e\r\n\r\nDifficulty Level: Moderate\r\nEstimated Install Time: 6 Hours\r\n\r\n\u003c\/div\u003e\r\nInstallation Video: \u003ca href=\"https:\/\/www.youtube.com\/watch?v=RlovY-lGUCM\" target=\"_blank\" rel=\"noopener\"\u003eClick Here\u003c\/a\u003e\r\n\r\n\u003c\/section\u003e","brand":"AEV","offers":[{"title":"AEV Non-Winch Cover Plate","offer_id":47571998408961,"sku":"12301000AF","price":2247.0,"currency_code":"USD","in_stock":true},{"title":"AEV Front Bumper Winch","offer_id":47571998441729,"sku":"12301000AF + Winch Plate","price":2265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/b0419b50-high-flare-3-1.jpg?v=1769733648"},{"product_id":"aev-black-lug-nuts","title":"AEV Black Lug Nuts","description":"\u003cp\u003eEnhance your AEV wheels with our premium OEM-style black chrome lug nuts. They feature a 60° conical seat and 14×1.5mm thread, utilizing the same 22mm (7\/8″) socket as your original equipment. Backed by a 1-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe AEV Black Lug Nuts are available in three options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 Lug Kit \u003c\/strong\u003e– Kit includes 24 lug nuts, perfect for JL Wrangler, JT Gladiator, Colorado\/Canyon, and Sierra 1500\/Silverado 1500 fitment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 Lug Kit\u003c\/strong\u003e – Kit includes 32 lug nuts, ideal for Ram HD, Sierra HD\/Silverado HD fitment.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEV","offers":[{"title":"24 Lug Kit","offer_id":48680995324161,"sku":"29060013AA","price":120.0,"currency_code":"USD","in_stock":true},{"title":"32 Lug Kit","offer_id":48680995356929,"sku":"29060014AA","price":160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/lug-nuts-24.webp?v=1777397584"},{"product_id":"aev-high-steer-kit-for-jl-wrangler-jt-gladiator","title":"AEV High Steer Kit for JL Wrangler \u0026 JT Gladiator","description":"\u003cp\u003eIf you are looking to substantially improve the steering response and body-roll control of your 2.5″ to 6″ lifted JL Wrangler or Gladiator, look no further. AEV’s High-Steering Kit features custom steering knuckles, raised track-bar tower, heavy-duty draglink and tie-rod, plus a high-clearance steering damper relocation kit.\u003c\/p\u003e\n\u003cp\u003eWhen combined, the components used in the AEV High Steer kit improve steering ground clearance and flatten the geometry of the draglink and track-bar, drawing the Jeep’s front roll-center closer to its center of gravity. The result is crisper turn-in steering feel and reduced body-roll during spirited driving.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Steering Geometry:\u003c\/strong\u003e Raises steering linkages (tie rod by 2.75″, track bar\/drag link by 2.5″) to correct geometry after lifting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Handling \u0026amp; Stability:\u003c\/strong\u003e Flattens drag link\/track bar angles, reduces bump steer and body roll, and moves front roll center closer to the center of gravity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncreased Off-Road Clearance:\u003c\/strong\u003e Raised steering linkages prevent impact with obstacles on rough terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Steering Control:\u003c\/strong\u003e Features adjustable steering stops for fine-tuning lock-to-lock steering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e Includes cast iron high steer knuckles, forged steel drag link, tie rod ends, and a chromoly tube tie rod.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEV","offers":[{"title":"Yes","offer_id":48681208545537,"sku":"52060007AA + NJL10100AA","price":2111.0,"currency_code":"USD","in_stock":true},{"title":"No","offer_id":48681208578305,"sku":"52060007AA","price":1990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/dpo_custom_option_63081_aev-steering-damper-upgrade-3-3000x.webp?v=1777415497"},{"product_id":"aev-steering-damper-relocation-kit-for-jl-wrangler-and-jt-gladiator","title":"AEV Steering Damper Relocation Kit for JL Wrangler and JT Gladiator","description":"\u003cp\u003eThe AEV Steering Damper Relocation Kit moves your steering damper above your tie rod, getting it completely out of harms way when out on the trail! This kit is an easy, bolt-on solution for protecting your Jeep’s steering damper from damage.\u003c\/p\u003e\n\u003cp\u003eThis relocation kit includes all necessary hardware and will bolt-on to JL Wrangler or JT Gladiator models equipped with a factory front differential housing and features an anodized finish to give it superior corrosion protection from the elements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMoves the Jeep’s steering damper from the stock OE position to up above the tie rod. The new position will help protect the damper from being damaged while driving over rough terrain.\u003c\/li\u003e\n\u003cli\u003eThe new position keeps the steering damper level to the tie rod, providing smooth and stable steering.\u003c\/li\u003e\n\u003cli\u003eCompatible only with mono-tube steering dampers. It is highly recommend to pair this relocation kit with the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/aev-conversions.com\/products\/steering-damper\"\u003eAEV Steering Damper\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFeatures a CNC machined aluminum clamp that secures the steering damper to the tie rod. It has an anodized finish to give it superior corrosion protection while bearing the elements underneath the vehicle.\u003c\/li\u003e\n\u003cli\u003eReplaces track bar bolt with AEV-provided double ended stud for attachment to axle.\u003c\/li\u003e\n\u003cli\u003eNo drilling, cutting, or permanent modification required\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEV","offers":[{"title":"Default Title","offer_id":48681210085633,"sku":"52060006AA","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/aev-steering-damper-relocation-for-jl-wrangler-and-gladiator-4.webp?v=1777415704"},{"product_id":"aev-stamped-geometry-correction-brackets-for-jl-wrangler-and-jt-gladiator","title":"AEV Stamped Geometry Correction Brackets for JL Wrangler and JT Gladiator","description":"\u003cp\u003eAfter pioneering Geometry Correction Brackets back in 2010, AEV has raised the bar again with the industry's first Stamped Geometry Correction Brackets. Designed to correct the front-end control arm geometry on vehicles with 2-4.5\" of suspension lift, the AEV Jeep Wrangler \u0026amp;amp; Gladiator stamped geometry correction brackets improve ride quality by eliminating front axle 'precession' caused by uncorrected suspension lift geometry. The corrected motion allows the front tires to move up and rearward (as they did on the stock vehicle) in response to a bump rather than trying to 'lunge' over it. Additionally, they dramatically reduce front-end 'dive' during hard braking by relocating the 'virtual instant center' of the front suspension. They also provide alignment correction for proper tracking by restoring caster angle without the need for cam bolts or different\/adjustable arms, plus a slight reduction in maximum front driveshaft angle during suspension travel.\u003c\/p\u003e\n\u003cp\u003eThe stamping process provides improved strength while reducing weight, and the new keyed square caster blocks allow for easy \"set it and forget it\" adjustments rather than round cam bolts that can slip and require special fasteners.\u003c\/p\u003e\n\u003cp\u003eAEV's Stamped Geometry Correction Brackets are compatible with both JL Wrangler and Gladiator and are included standard with AEV's 2.5\" DualSport RT Suspension System for JL Wrangler. These brackets can be added as an option to AEV's 2\" Spacer Lift, in addition to other brand suspension systems that also retain the  front control arms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits Jeep Gladiator \/ JL Wrangler with 2-4.5” of suspension lift\u003c\/li\u003e\n\u003cli\u003e50ksi traditional stamped carbon steel \u003c\/li\u003e\n\u003cli\u003eOptimizes front control arm geometry\u003c\/li\u003e\n\u003cli\u003eEliminates the need for adjustable control arms or cam bolts for caster correction\u003c\/li\u003e\n\u003cli\u003eEasy “set it and forget it” caster adjustments\u003c\/li\u003e\n\u003cli\u003eDecreases the operating angle of the front driveshaft\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eReduced brake-dive and improved impact-response\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEV","offers":[{"title":"Default Title","offer_id":48681210282241,"sku":"NJL20500AB","price":329.0,"currency_code":"USD","in_stock":true}]},{"product_id":"aev-front-differential-skid-plate-for-jl-wrangler-and-jt-gladiator","title":"AEV Front Differential Skid Plate for JL Wrangler and JT Gladiator","description":"\u003cp\u003eConquer the toughest trails with confidence using the AEV Front Differential Skid Plate, designed specifically for Jeep Wrangler JL and Gladiator JT with a Dana 44 front differential. This premium skid plate lets you glide over obstacles rather than risking damage to your differential housing or pinion\"”keeping your vehicle protected and moving, even in the most challenging off-road conditions.\u003c\/p\u003e\n\u003cp\u003eCrafted from 4mm thick, stamped steel, this skid plate strikes the perfect balance between durability and weight reduction. Its precision-stamped design hugs the front differential for optimal ground clearance while eliminating potential snag points.\u003c\/p\u003e\n\u003cp\u003eProudly made in the USA, the AEV Front Differential Skid Plate is finished with an e-coating to ensure superior corrosion resistance, providing reliable protection for years of rugged adventures.\u003c\/p\u003e\n\u003cdiv class=\"product__warning\"\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eE-coated to provide exceptional resistance to corrosion\u003c\/li\u003e\n\u003cli\u003e4mm stamped steel construction for maximum strength\u003c\/li\u003e\n\u003cli\u003eDrain holes at low points to allow debris to wash out\u003c\/li\u003e\n\u003cli\u003eProudly manufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"AEV","offers":[{"title":"Default Title","offer_id":48681210970369,"sku":"52060005AA","price":389.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/aev-front-differential-skid-plate-for-jl-wrangler-and-jt-gladiator-2.webp?v=1777415884"},{"product_id":"aev-front-differential-cover-for-jl-wrangler-and-jt-gladiator","title":"AEV Front Differential Cover for JL Wrangler and JT Gladiator","description":"\u003cp\u003eAEV Front Differential Cover for JL Wrangler and JT Gladiator is designed specifically for the new Dana M210 (front) axle found in the Jeep Gladiator and JL Wrangler. These heavy duty, nodular iron Differential Covers feature an axle specific fluid level port, placed at the correct level to meet factory specifications, eliminating the need to guess on oil level or use a dipstick to figure out the correct amount of oil.\u003c\/p\u003e\n\u003cp\u003eFor added convenience, AEV Differential Covers feature an oversized oil fill port located on the top of the cover. This fill port not only allows you to easily add fluid in the field if axle repairs are necessary, but also doubles as an inspection port, allowing the user to see inside the differential, inspect ring gear teeth, look for water intrusion or even use a dial indicator to inspect for problems without ever removing the cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"product__warning\"\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured out of high-strength nodular iron\u003c\/li\u003e\n\u003cli\u003eJL\/Gladiator-specific front (Dana M210) differential cover\u003c\/li\u003e\n\u003cli\u003eAEV’s exclusive oversized fill plug\u003c\/li\u003e\n\u003cli\u003eReinforced bottom edge with recessed hardware\u003c\/li\u003e\n\u003cli\u003eE-coated and powder coated for maximum durability\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"AEV","offers":[{"title":"Default Title","offer_id":48681217196289,"sku":"52060001AA","price":236.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/aev-jl-gladiator-differential-covers.jpg?v=1777416130"},{"product_id":"aev-rear-differential-cover-for-jl-wrangler-and-jt-gladiator","title":"AEV Rear Differential Cover for JL Wrangler and JT Gladiator","description":"\u003cp\u003eAEV Rear Differential Cover for JL Wrangler and JT Gladiator is designed specifically for the new\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eDana M220 (rear)\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eaxle found in the Jeep Gladiator and JL Wrangler. These heavy duty, nodular iron Differential Covers feature an axle specific fluid level port, placed at the correct level to meet factory specifications, eliminating the need to guess on oil level or use a dipstick to figure out the correct amount of oil.\u003c\/p\u003e\n\u003cp\u003eFor added convenience, AEV Differential Covers feature an oversized oil fill port located on the top of the cover. This fill port not only allows you to easily add fluid in the field if axle repairs are necessary, but also doubles as an inspection port, allowing the user to see inside the differential, inspect ring gear teeth, look for water intrusion or even use a dial indicator to inspect for problems without ever removing the cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"product__warning\"\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured out of high-strength nodular iron\u003c\/li\u003e\n\u003cli\u003eJL\/Gladiator-specific rear (Dana M220) differential cover\u003c\/li\u003e\n\u003cli\u003eAEV’s exclusive oversized fill plug\u003c\/li\u003e\n\u003cli\u003eReinforced bottom edge with recessed hardware\u003c\/li\u003e\n\u003cli\u003eE-coated and powder coated for maximum durability\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"AEV","offers":[{"title":"Default Title","offer_id":48681217294593,"sku":"52060000AA","price":236.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/aev-jl-gladiator-differential-covers.jpg?v=1777416130"},{"product_id":"aev-procal-snap-for-jl-wrangler-and-jt-gladiator","title":"AEV ProCal SNAP for JL Wrangler and JT Gladiator","description":"\u003cp\u003eAEV ProCal SNAP for Jeep Wrangler JL and Gladiator is a cost-effective calibration module that accurately corrects your speedometer after installing larger tires (up to 42″ tall) and\/or changing the axle or transfer case gear ratio. It also allows you to adjust TPMS (Tire Pressure Monitoring System) settings, saving you from the headaches of going to the dealership or depending on a lesser-quality module.\u003c\/p\u003e\n\u003cp\u003eAfter installing AEV’s Programming Harness (included), ProCal SNAP simply plugs into your vehicle’s OBDII diagnostic port and interfaces with the user through the audio system equalizer. After inputting the necessary numerical values for the tire size or gear ratio through the audio equalizer (example: 35.5” tall tire = bass 3, mid 5 and treble 5) the settings are saved by pressing and holding a combination of buttons on the steering wheel. It’s that easy…in fact, some might say it’s a SNAP!\u003c\/p\u003e\n\u003cp\u003eAEV ProCal SNAP for Jeep Wrangler JL and Gladiator is proudly manufactured in the USA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy installation\u003c\/li\u003e\n\u003cli\u003eFits 2018+ JL Wrangler and Gladiator truck\u003c\/li\u003e\n\u003cli\u003eAccurately calibrates your speedometer in minutes\u003c\/li\u003e\n\u003cli\u003eIdeal for vehicles with larger than stock tires (up to 42″ tall) and\/or different axle\/transfer case gear ratio\u003c\/li\u003e\n\u003cli\u003eNOW featuring TPMS capability \u003c\/li\u003e\n\u003cli\u003eProudly made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEV","offers":[{"title":"Default Title","offer_id":48681220079873,"sku":"37406015AF","price":225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/procal-snap-3.webp?v=1777416289"},{"product_id":"aev-heavy-duty-adjustable-lower-control-arms-for-jl-wrangler-and-jt-gladiator","title":"AEV Heavy Duty Adjustable Lower Control Arms for JL Wrangler and JT Gladiator","description":"\u003cp\u003eAEV Heavy Duty Adjustable Lower Control Arms are engineered to maintain proper suspension geometry, durability, and ride quality across a wide range of lift heights—while providing the additional clearance required for larger tire packages. \u003c\/p\u003e\n\u003cp\u003eWhen paired with AEV’s\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/aev-conversions.com\/products\/aev-heavy-duty-adjustable-lower-control-arms-for-jl-wrangler-jt-gladiator#\"\u003e4\" DualSport Suspension System\u003c\/a\u003e, these control arms are required for 39\" tire fitments, ensuring correct axle positioning, tire clearance, and overall system performance.\u003c\/p\u003e\n\u003ch3\u003eEngineered for System Integration\u003c\/h3\u003e\n\u003cp\u003eUnlike typical aftermarket solutions that prioritize maximum articulation at the expense of refinement and service life, AEV control arms are designed as part of a fully integrated suspension system. The result is predictable handling, consistent alignment, and long-term durability under increased load conditions.\u003c\/p\u003e\n\u003ch3\u003eKey Features \u0026amp; Specifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-Duty Construction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1.75OD x .25\" wall DOM steel tubing provides high strength and resistance to deformation under off-road and on-road loads\u003c\/li\u003e\n\u003cli\u003eDesigned to withstand the increased leverage and stress associated with larger tires and higher ride heights\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWide Range Adjustability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible from stock ride height up to approximately 6\" of lift\u003c\/li\u003e\n\u003cli\u003eSupports use with or without geometry correction brackets\u003c\/li\u003e\n\u003cli\u003eAllows precise axle positioning and caster adjustment across varying configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOptimized Tire Clearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront control arms feature revised geometry to increase clearance for larger tire diameters\u003c\/li\u003e\n\u003cli\u003eCritical for proper operation with 39\" tires and\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/aev-conversions.com\/products\/aev-heavy-duty-adjustable-lower-control-arms-for-jl-wrangler-jt-gladiator#\"\u003eAEV 4\" DualSport Suspension System\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOEM-Quality Rubber Bushings\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaintenance-free design—no lubrication required\u003c\/li\u003e\n\u003cli\u003eExcellent noise, vibration, and harshness (NVH) isolation\u003c\/li\u003e\n\u003cli\u003eEliminates common issues associated with spherical or flex joints, including noise, accelerated wear, and contamination\u003c\/li\u003e\n\u003cli\u003eMaintains full articulation without introducing harshness or binding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance Characteristics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaintains factory-like ride quality and handling characteristics\u003c\/li\u003e\n\u003cli\u003ePreserves suspension kinematics under increased ride height\u003c\/li\u003e\n\u003cli\u003eReduces long-term wear compared to typical aftermarket joint systems\u003c\/li\u003e\n\u003cli\u003eProvides consistent, quiet operation in both on-road and off-road environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJeep Wrangler JL (2018+)\u003c\/li\u003e\n\u003cli\u003eJeep Gladiator JT (2020+)\u003c\/li\u003e\n\u003cli\u003eUsable from stock height to ~6\" lift\u003c\/li\u003e\n\u003cli\u003eRequired for 39\" tires with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/aev-conversions.com\/products\/aev-heavy-duty-adjustable-lower-control-arms-for-jl-wrangler-jt-gladiator#\"\u003eAEV 4\" DualSport Suspension System\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAEV Heavy Duty Adjustable Lower Control Arms provide the necessary strength, adjustability, and clearance for larger tire applications while preserving OEM-level refinement and durability. Designed for integration with AEV suspension systems, they deliver consistent performance without introducing additional maintenance or NVH concerns.\u003c\/p\u003e","brand":"AEV","offers":[{"title":"Front \/ JL Wrangler","offer_id":48681222275329,"sku":"22062399AA","price":550.0,"currency_code":"USD","in_stock":true},{"title":"Front \/ JT Gladiator","offer_id":48681222308097,"sku":"22062399AA","price":550.0,"currency_code":"USD","in_stock":true},{"title":"Rear \/ JL Wrangler","offer_id":48681222340865,"sku":"22062398AA","price":550.0,"currency_code":"USD","in_stock":true},{"title":"Rear \/ JT Gladiator","offer_id":48681222373633,"sku":"22062397AA","price":550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/22062397AA.webp?v=1777416709"},{"product_id":"aev-snorkel-kit-for-jl-wrangler-and-jt-gladiator","title":"AEV Snorkel Kit for JL Wrangler and JT Gladiator","description":"\u003cdiv id=\"shopify-section-template--18834970149052__rich_text_L36t4f\" class=\"shopify-section shopify-section--rich-text\"\u003e\n\u003csection class=\"section section--flush\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"section__color-wrapper\"\u003e\n\u003cdiv class=\"container vertical-breather\"\u003e\n\u003cdiv class=\"content-box content-box--large content-box--text-left content-box--center text-container\"\u003e\n\u003cp\u003eInspired by heavy duty industrial and military applications around the world, AEV's Jeep JL Wrangler\/Gladiator Snorkel Kit improves engine performance by drawing in the cleanest, coolest air charge possible, even in the worst conditions. If you are serious about off-road adventure, the AEV Snorkel is one of the most important modifications you can make.\u003c\/p\u003e\n\u003cp\u003eThese Snorkel Kits for Jeep JL Wrangler\/Gladiator are extensively tested in both real-world and controlled environments, and unlike other manufacturers, AEV Snorkels are manufactured in the USA out of a high-quality, cross-linked polyethylene. Lightweight and extremely strong, this material offers the best combination of strength, UV-resistance, and long-term durability. This material also has exceptional thermal stability in extreme hot\/cold temperatures.\u003c\/p\u003e\n\u003cp\u003eThe AEV Snorkel for the 2.0L Turbo, 2.0L 4xe, 3.6L Gas, and 2.2L CRD mounts on the right-hand side of the vehicle, whereas the 3.0L EcoDiesel Snorkel mounts on the left-hand side of the vehicle. An optional A-Pillar Mounting Bracket is also available for customers who prefer having the option to fold down the windshield on their Wrangler or Gladiator (excludes 3.0L EcoDiesel). This bracket mounts to the A-Pillar\u003cspan\u003e \u003c\/span\u003e\u003cem\u003ebehind\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ethe windshield frame, leaving it free to move up and down independently from the Snorkel. AEV recommends installing the Snorkel using the standard mounting bracket included with this kit. This mounting configuration will be the strongest and most durable option for off-road use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Snorkel Kit for gasoline\/CRD engines includes a standard Air Ram Inlet, the 3.0L EcoDiesel kit includes a self-cleaning pre-filter\u003c\/strong\u003e. There are a number of aftermarket pre-filter options on the market for non-EcoDiesel customers who travel in severe environments with high dust, sand, or silt.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cbr\u003eFender Flare Specific Designs\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe JL Wrangler\/Gladiator Snorkel Kits are ordered according to your engine and OE fender flare style - which is either a \"high\" or \"low\" style fender flare. In North America for example, Rubicon models have a \"high\" fender flare option that allows for more tire clearance. They may look similar, but the \"high\" fender flare sits about an inch higher and is an inch wider than the standard or \"low\" fender flare. Export models may vary, depending on the destination country. Please refer to the graphic if you are unsure what style fender flare you have. The EcoDiesel Snorkel is only available for the high flare option.\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0662\/2124\/4604\/files\/jl-gladiator-snorkel-768x360.jpg?v=1750701050\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003cli\u003eRaised intake helps reduce intake of dust, sand, and silt\u003c\/li\u003e\n\u003cli\u003eSpecific designs for both OE standard and high flare options\u003c\/li\u003e\n\u003cli\u003eExtremely durable – made from UV-stable cross-linked polyethylene\u003c\/li\u003e\n\u003cli\u003eInstalls directly into the factory airbox\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e","brand":"AEV","offers":[{"title":"2.0 Turbo \/ 2.0 Hybrid \/ 3.6L \/ 2.2 CRD \/ Low","offer_id":48700450341121,"sku":"40306510AC","price":599.0,"currency_code":"USD","in_stock":true},{"title":"2.0 Turbo \/ 2.0 Hybrid \/ 3.6L \/ 2.2 CRD \/ High","offer_id":48700450373889,"sku":"40306500AC","price":599.0,"currency_code":"USD","in_stock":true},{"title":"3.0 EcoDiesel (includes Pre-Filter) \/ High","offer_id":48700450406657,"sku":"40306600AB","price":904.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/snorkel-kit-for-wrangler-gladiator-7.webp?v=1777584808"},{"product_id":"aev-2-spacer-lift-for-jt-gladiator-sale-price","title":"AEV 2\" Spacer Lift for JT Gladiator Sale price","description":"\u003cp\u003eAEV's 2-Inch Spacer Lift is a feature packed solution for Jeep Gladiator owners looking to add larger tires and improve ground clearance without having to replace their factory coil springs and shocks. The AEV 2-Inch Spacer Lift for Jeep Gladiator includes unique front and rear polyurethane coil spacers with integrated isolators and locating tabs, front and rear bump stop extensions, extended length front and rear sway bar end links, front and rear shock extension brackets and a driveshaft carrier bearing spacer. AEV even goes one step further and takes care of the electronics by including a ProCal SNAP for painless speedometer recalibration!\u003c\/p\u003e\n\u003cp\u003eThis 2\" Spacer Lift has been engineered to integrate seamlessly with the Jeep Gladiator's OEM suspension system, minimizing the amount of parts you need to replace. Shock extension brackets allow the factory shocks to be used, which are often superior to many of the aftermarket shocks included with similar systems in this price range. New Front and Rear Sway Bar End Links have been extended to ensure bind-free functionality.\u003c\/p\u003e\n\u003cp\u003eAEV's ProCal SNAP is a simple, electronic recalibration module that plugs into your vehicle's OBDII diagnostic port. It utilizes the stereo's audio equalizer to input the numerical values for your new tire size- saving you time and money by not having to make a trip to the dealership for speedometer recalibration. The ProCal SNAP will also recalibrate for axle gear ratio, transfer case gear ratio changes and TPMS threshold.\u003c\/p\u003e\n\u003cp\u003eAEV's 2-Inch Spacer Lift for Jeep Gladiator provides a more aggressive appearance and without sacrificing the comfortable factory ride quality that drivers have come to appreciate in modern day Jeeps, like the Gladiator. Proudly made in the USA and backed by AEV's Lifetime Warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum recommended tire sizes*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSport\/Sahara (North America): 35×12.50R17\u003c\/li\u003e\n\u003cli\u003eRubicon\/Mojave (North America): 37×12.50R17\u003c\/li\u003e\n\u003cli\u003eSport\/Sahara\/Rubicon (Export): 35×12.50R17\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits LHD \u0026amp; RHD models (except Mojave!)\u003c\/li\u003e\n\u003cli\u003eQuick, easy installation\u003c\/li\u003e\n\u003cli\u003eUtilizes factory Gladiator shocks\u003c\/li\u003e\n\u003cli\u003eAEV quality at an economical price\u003c\/li\u003e\n\u003cli\u003eAccommodates up to a 37″ tall tire*\u003c\/li\u003e\n\u003cli\u003eINCLUDES ProCal SNAP for easy speedometer recalibration!\u003c\/li\u003e\n\u003cli\u003eAEV Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eProudly made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEV","offers":[{"title":"Default Title","offer_id":48700472885505,"sku":"N0921000AE","price":539.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/2-spacer-lift-for-gladiator-2_1.webp?v=1777585083"},{"product_id":"aev-2-spacer-lift-for-jt-gladiator-mojave","title":"AEV 2\" Spacer Lift for JT Gladiator Mojave","description":"\u003cp\u003eAEV 2\" Spacer Lift Kit is the best way for 2020+ Jeep Gladiator Mojave owners to add larger tires and improve ground clearance without having to replace any of the performance-tuned OEM suspension components found on these popular vehicles. \u003c\/p\u003e\n\u003cp\u003eAll of the components included in the AEV 2\" Spacer Lift Kit for Jeep Gladiator Mojave have been engineered to integrate seamlessly with the Mojave's suspension package, for customers who are happy with the overall performance and wish to retain the favorable ride quality and higher-speed damping. The AEV 2\" spacer lift for Jeep Gladiator Mojave includes unique front and rear polyurethane coil spacers with integrated isolators and locating tabs, front and rear bump stop extensions, extended length front and rear sway bar end links, front and rear shock extension brackets and a driveshaft carrier bearing spacer. New Front and Rear Sway Bar End Links have been extended to ensure bind-free functionality.\u003c\/p\u003e\n\u003cp\u003eTo make the AEV 2\" Spacer Lift Kit for Jeep Gladiator Mojave as complete and user friendly as possible, an AEV ProCal SNAP is included for painless speedometer recalibration. ProCal SNAP is a simple, electronic recalibration module that plugs into your vehicle's OBDII diagnostic port. It utilizes the stereo's audio equalizer to input the numerical values for your new tire size- saving you time and money by not having to make a trip to the dealership for speedometer recalibration. The AEV ProCal SNAP will also recalibrate for axle gear ratio, transfer case gear ratio changes and TPMS threshold.\u003c\/p\u003e\n\u003cp\u003eThe AEV 2\" Jeep Gladiator Mojave leveling kit is proudly made in the USA and backed by AEV's Lifetime Warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAEV recommends up to a 37×12.50R17 tire. Aftermarket wheels\/wheel spacers are required and minor trimming may also be necessary depending on wheel specs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically for 2020+ Gladiator Mojave\u003c\/li\u003e\n\u003cli\u003eQuick, easy installation\u003c\/li\u003e\n\u003cli\u003eRetains the Mojave coil springs, shocks and bump stops\u003c\/li\u003e\n\u003cli\u003eAccommodates up to a 37″ tall tire*\u003c\/li\u003e\n\u003cli\u003eINCLUDES ProCal SNAP for easy speedometer recalibration!\u003c\/li\u003e\n\u003cli\u003eAEV Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eProudly made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEV","offers":[{"title":"Default Title","offer_id":48700508307713,"sku":"N0921010AB","price":589.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/2-spacer-lift-for-gladiator-mojave-2.webp?v=1777585203"},{"product_id":"aev-vertical-tire-mount-for-2019-jeep-gladiator","title":"AEV Vertical Tire Mount for 2019+ Jeep Gladiator","description":"\u003cp\u003eAEV's Vertical Spare Tire Mount for 2019+ Jeep Gladiator is a vehicle specific solution for securing your full-size spare in the bed of your truck. The vertical spare wheel mount is fully adjustable to accommodate a range of tire sizes up to 42x14.50 and features a robust tubular steel frame that securely attaches to both your truck's forwardmost bed rail and the floor of the bed to safely hold your oversized wheel and tire in place, even on the roughest off-road terrain.\u003c\/p\u003e\n\u003cp\u003eCareful attention was also paid to ensure that the overall height of the mount and tire would be compatible with the installation of most aftermarket toppers. AEV's Vertical Spare Tire Mount for truck bed also features additional provisions for accessories such as a sand flag or CB antenna, as well as a convenient spot to hold a shovel. E-coated and powder coated for maximum protection against the elements and proudly made in the USA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAllows fitment up to 42×14.50 tire\u003c\/li\u003e\n\u003cli\u003eVertically mounts your full-size spare tire securely in your bed\u003c\/li\u003e\n\u003cli\u003eRobust, tubular steel frame designed for off-road use\u003c\/li\u003e\n\u003cli\u003eAdjustable to accommodate a wide range of tire sizes\u003c\/li\u003e\n\u003cli\u003eE-coated and powder coated black finish\u003c\/li\u003e\n\u003cli\u003eProudly made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEV","offers":[{"title":"Default Title","offer_id":48700526788865,"sku":"59060017AA","price":750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/aev-vertical-tire-mount-for-2019-jeep-gladiator-3.webp?v=1777585301"},{"product_id":"aev-2-5-3-dualsport-rt-suspension-for-2019-jt-gladiator","title":"AEV 2.5\" - 3\" DualSport RT Suspension for 2019+ JT Gladiator","description":"\u003cp\u003eAEV's first step in designing the expedition-ready, JT 2.5\" DualSport RT Suspension System for Jeep Gladiator was understanding the shortcomings and limitations of the OEM suspension package.\u003c\/p\u003e\n\u003cp\u003eThe Gladiator's factory suspension (especially on Rubicon) is very soft, lightly damped and has a very low suspension frequency. This \"soft tuning\" helps the Gladiator drive \"less like a truck\" and soak up the bumps on the highway decently well but that can also make the handling feel a bit loose and sometimes uncontrolled. This is not a big deal for people who are just driving their Gladiator to and from work every day, but it is definitely not the ideal suspension formula for overland enthusiasts who also need to manage lots of cargo and gear when traveling off the grid.\u003c\/p\u003e\n\u003cp\u003eAs with all of AEV's expedition-ready suspension systems, the DualSport Suspension for the Jeep Gladiator is FMVSS No. 126 Compliant. FMVSS No. 126 is a rigorous standard set by the National Highway Traffic Safety Administration (NHTSA) that tests new electronic stability control (ESC) systems by subjecting it to various maneuvers designed to evaluate its effectiveness in preventing loss of control and skidding, including evasive lane-changing maneuvers at highways speeds.\u003c\/p\u003e\n\u003cp\u003eOur DualSport suspension systems are known for ride quality and its no exception for the Gladiator JT. Coil spring and shock tuning was essential on the Gladiator system to provide the optimal balance of load carrying capacity and ride quality that customers have come to expect from AEV. The DualSport RT Suspension System includes a set of our frequency-tuned, triple-rate coil springs to provide 2.5-3\" of additional front and rear ride height.\u003c\/p\u003e\n\u003cp\u003eCustomers can now fine tune their 2.5-inch leveling kit for Jeep Gladiator, even further by choosing one of two available coil spring options:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5\" Standard Load Coil Springs\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare optimized for an AEV-spec Gladiator with typical gear\/cargo inside. This means the ideal ride height, handling and overall performance will be achieved on a vehicle with steel bumpers, winch, full-size spare and recovery gear (+0-400 lbs. over factory weight).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\" High Capacity Coil Springs\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare specifically designed for overland enthusiasts who have a fully outfitted vehicle that is also consistently loaded with heavier gear (+400-700 lbs. over the standard load spring), such as modular cargo systems or roof rack\/rooftop tent combinations*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese coil springs are then paired with a set of AEV-tuned, 46mm Bilstein 5100 series shock absorbers for a slightly sportier and more controlled feel. The AEV\/Bilstein coil spring and shock combination used in this suspension increases both up travel and down travel, while also providing better articulation and improved off-road speed potential and bottoming control. Even when towing, the suspension feels stable, planted, and confidence inspiring.\u003c\/p\u003e\n\u003cp\u003eWe then optimized the Gladiator's front and rear suspension geometry throughout the entire range of motion, tightening up the handling and road feel, resulting in a great ride and performance without introducing harshness or driver fatigue. In the front, a pair of AEV's heavy duty, stamped control arm geometry correction brackets are included for improved ride quality and reduced nose-dive under hard braking. A rear track bar tower extension is included to raise the rear roll center, reduce body-roll and generate a better turn-in response. Extended length front and rear sway bar end links compensate for the additional lift height, while new front and rear bump stop spacers improve bumper\/axle contact under full articulation and jounce. Due to this suspension system's lower lift height, there is no need to swap out any of the OE track bars, control arms or steering components.\u003c\/p\u003e\n\u003cp\u003eAEV's ProCal SNAP is included for quick and easy speedometer recalibration, as well as our JL\/JT Jack Base for added safety and stability when changing a 35\" and taller tire with the factory scissor jack. \u003c\/p\u003e\n\u003cp\u003eThis Jeep Gladiator suspension lift kit is proudly made in the USA and features AEV's Lifetime Warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum recommended tire sizes*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSport\/Overland (North America):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e35×12.50R17\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubicon (North America):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e37×12.50R17\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSport\/Overland\/Rubicon (Export):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e35×12.50R17\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEV","offers":[{"title":"3.0 EcoDiesel \/ Left Hand Drive \/ Standard Capacity","offer_id":48700592849153,"sku":"N0922200AA","price":1919.0,"currency_code":"USD","in_stock":true},{"title":"3.0 EcoDiesel \/ Left Hand Drive \/ High Capacity","offer_id":48700592881921,"sku":"N0922405AA","price":1964.73,"currency_code":"USD","in_stock":true},{"title":"3.6L Gas \/ Left Hand Drive \/ Standard Capacity","offer_id":48700592914689,"sku":"N0922100AA","price":1809.0,"currency_code":"USD","in_stock":true},{"title":"3.6L Gas \/ Left Hand Drive \/ High Capacity","offer_id":48700592947457,"sku":"N0922305AA","price":1912.73,"currency_code":"USD","in_stock":true},{"title":"3.6L Gas \/ Right Hand Drive \/ Standard Capacity","offer_id":48700592980225,"sku":"N0922105AA","price":1809.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/jt-2-5e280b3-dualsport-rt-suspension-4.webp?v=1777585408"},{"product_id":"aev-2-5-3-dualsport-xp-suspension-for-2019-jt-gladiator","title":"AEV 2.5\" - 3\" DualSport XP Suspension for 2019+ JT Gladiator","description":"\u003cp\u003eAEV's first step in designing the expedition-ready, JT 2.5\" DualSport RT Suspension System for Jeep Gladiator was understanding the shortcomings and limitations of the OEM suspension package.\u003c\/p\u003e\n\u003cp\u003eThe Gladiator's factory suspension (especially on Rubicon) is very soft, lightly damped and has a very low suspension frequency. This \"soft tuning\" helps the Gladiator drive \"less like a truck\" and soak up the bumps on the highway decently well but that can also make the handling feel a bit loose and sometimes uncontrolled. This is not a big deal for people who are just driving their Gladiator to and from work every day, but it is definitely not the ideal suspension formula for overland enthusiasts who also need to manage lots of cargo and gear when traveling off the grid.\u003c\/p\u003e\n\u003cp\u003eAs with all of AEV's expedition-ready suspension systems, the DualSport Suspension for the Jeep Gladiator is FMVSS No. 126 Compliant. FMVSS No. 126 is a rigorous standard set by the National Highway Traffic Safety Administration (NHTSA) that tests new electronic stability control (ESC) systems by subjecting it to various maneuvers designed to evaluate its effectiveness in preventing loss of control and skidding, including evasive lane-changing maneuvers at highways speeds.\u003c\/p\u003e\n\u003cp\u003eOur DualSport suspension systems are known for ride quality and its no exception for the Gladiator JT. Coil spring and shock tuning was essential on the Gladiator system to provide the optimal balance of load carrying capacity and ride quality that customers have come to expect from AEV. The DualSport RT Suspension System includes a set of our frequency-tuned, triple-rate coil springs to provide 2.5-3\" of additional front and rear ride height.\u003c\/p\u003e\n\u003cp\u003eCustomers can now fine tune their 2.5-inch leveling kit for Jeep Gladiator, even further by choosing one of two available coil spring options:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5\" Standard Load Coil Springs\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare optimized for an AEV-spec Gladiator with typical gear\/cargo inside. This means the ideal ride height, handling and overall performance will be achieved on a vehicle with steel bumpers, winch, full-size spare and recovery gear (+0-400 lbs. over factory weight).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\" High Capacity Coil Springs\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare specifically designed for overland enthusiasts who have a fully outfitted vehicle that is also consistently loaded with heavier gear (+400-700 lbs. over the standard load spring), such as modular cargo systems or roof rack\/rooftop tent combinations*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese coil springs are then paired with a set of AEV-tuned, 46mm Bilstein 5100 series shock absorbers for a slightly sportier and more controlled feel. The AEV\/Bilstein coil spring and shock combination used in this suspension increases both up travel and down travel, while also providing better articulation and improved off-road speed potential and bottoming control. Even when towing, the suspension feels stable, planted, and confidence inspiring.\u003c\/p\u003e\n\u003cp\u003eWe then optimized the Gladiator's front and rear suspension geometry throughout the entire range of motion, tightening up the handling and road feel, resulting in a great ride and performance without introducing harshness or driver fatigue. In the front, a pair of AEV's heavy duty, stamped control arm geometry correction brackets are included for improved ride quality and reduced nose-dive under hard braking. A rear track bar tower extension is included to raise the rear roll center, reduce body-roll and generate a better turn-in response. Extended length front and rear sway bar end links compensate for the additional lift height, while new front and rear bump stop spacers improve bumper\/axle contact under full articulation and jounce. Due to this suspension system's lower lift height, there is no need to swap out any of the OE track bars, control arms or steering components.\u003c\/p\u003e\n\u003cp\u003eAEV's ProCal SNAP is included for quick and easy speedometer recalibration, as well as our JL\/JT Jack Base for added safety and stability when changing a 35\" and taller tire with the factory scissor jack. \u003c\/p\u003e\n\u003cp\u003eThis Jeep Gladiator suspension lift kit is proudly made in the USA and features AEV's Lifetime Warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum recommended tire sizes*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSport\/Overland (North America):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e35×12.50R17\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubicon (North America):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e37×12.50R17\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSport\/Overland\/Rubicon (Export):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e35×12.50R17\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFMVSS No.126 Compliant\u003c\/li\u003e\n\u003cli\u003eAvailable with standard load or high capacity coil springs\u003c\/li\u003e\n\u003cli\u003eFrequency-tuned, triple rate coil springs and specific shock tuned for the best possible ride quality and handling\u003c\/li\u003e\n\u003cli\u003eBilstein billet reservoir mounts included with system\u003c\/li\u003e\n\u003cli\u003eProudly made in the USA and features AEV’s Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEV","offers":[{"title":"3.0 EcoDiesel \/ Left Hand Drive \/ Standard Capacity","offer_id":48700603531521,"sku":"N0922285AA","price":3618.74,"currency_code":"USD","in_stock":true},{"title":"3.0 EcoDiesel \/ Left Hand Drive \/ High Capacity","offer_id":48700603564289,"sku":"N0922485AA","price":3664.47,"currency_code":"USD","in_stock":true},{"title":"3.6L Gas \/ Left Hand Drive \/ Standard Capacity","offer_id":48700603597057,"sku":"N0922185AA","price":3508.74,"currency_code":"USD","in_stock":true},{"title":"3.6L Gas \/ Left Hand Drive \/ High Capacity","offer_id":48700603629825,"sku":"N0922385AA","price":3612.47,"currency_code":"USD","in_stock":true},{"title":"3.6L Gas \/ Right Hand Drive \/ Standard Capacity","offer_id":48700603662593,"sku":"N0922190AA","price":3508.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/jt-2-5e280b3-dualsport-rt-suspension-4.webp?v=1777585408"},{"product_id":"aev-bilstein-xp8100-reservoir-shocks-for-jt-gladiator","title":"AEV \/ Bilstein XP8100 Reservoir Shocks for JT Gladiator","description":"\u003cp\u003eAEV\/Bilstein XP8100 Reservoir Shocks are a high-performance, direct-fit upgrade for your lifted Jeep Gladiator. This upgrade will provide increased dampening performance and consistency over our standard 5100 shocks, especially on heavier vehicles that travel at higher speeds over rough terrain.\u003c\/p\u003e\n\u003cp\u003eThese AEV\/Bilstein XP8100 reservoir shocks are constructed from aerospace-quality billet components and tuned by AEV to work in perfect harmony with your outfitted Jeep Gladiator. When we tune shocks, we use the same target weight as one of our turn-key conversions to ensure that you get the absolute best possible ride quality and handling, without the degradation in performance, commonly associated with the added weight of bumpers, winch, full-size spare, tent, etc.\u003c\/p\u003e\n\u003cp\u003eHeat management is critical for consistent performance and longevity, so these large bore, 66mm (2.6\") shock bodies are paired with a unique remote or piggyback reservoir, offering a higher oil volume capacity to control heat while tackling rough road surfaces over long distances - a scenario that many overland travelers know all too well. A larger piston area also offers added control in hard use (such as with heavy trucks) and the ability to tune for a broader damping range for vehicles that get used with and without added gear. For improved durability against corrosion, these shocks feature the same silver painted finish as our 5100 series shocks.\u003c\/p\u003e\n\u003cp\u003eThese AEV\/Bilstein XP8100 reservoir shocks for Jeep Gladiator are available as a set of (4) for customers looking to upgrade their existing shock package in addition to being included with our new 2.5-3\" DualSport XP Suspension Systems and pair exceptionally well with our 3\" High Capacity Coil Springs.\u003c\/p\u003e\n\u003cp\u003eWhether rugged trails or asphalt roads, the AEV\/Bilstein XP8100 Reservoir Shocks offer consistent comfort and control so you can tame the terrain in style.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits Gladiator with 2-3” of suspension lift\u003c\/li\u003e\n\u003cli\u003eDirect fit for an easy installation\u003c\/li\u003e\n\u003cli\u003eGladiator-specific shock tuning provides an optimum ride and handling experience\u003c\/li\u003e\n\u003cli\u003ePiggyback\/Remote reservoir offers increased oil capacity and ability to tune for broader dampening range for consistent performance over rough terrain\u003c\/li\u003e\n\u003cli\u003e18mm piston rod provides brute tensile strength and reduces internal gas force ramp-up providing a smoother ride\u003c\/li\u003e\n\u003cli\u003eBillet rod end with vulcanized mounts for an exact OE fit and long-term durability\u003c\/li\u003e\n\u003cli\u003eBilstein billet reservoir mounts included\u003c\/li\u003e\n\u003cli\u003eCovered by Bilstein’s 2-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEV","offers":[{"title":"Default Title","offer_id":48700752789761,"sku":"NJT22400AA","price":2194.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/xp8100-reservoir-shock-upgrade-for-wranger-jl_9ad61073-2787-416c-a08f-d4e80be62dc0.webp?v=1777586219"},{"product_id":"aev-3-high-capacity-coil-springs-for-jt-gladiator","title":"AEV 3\" High Capacity Coil Springs for JT Gladiator","description":"\u003cp\u003eAEV 3-inch high-capacity coil springs are a direct fit upgrade for Jeep Gladiator customers with an AEV 2.5\" DualSport Suspension System already installed on their vehicle. Developed with the true overland enthusiast in mind, these frequency-tuned, progressive rate Jeep Gladiator coil springs provide the increased load carrying capacity necessary for heavily loaded vehicles, while still offering the exceptional ride quality, handling and off-road articulation that AEV is known for.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Load\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCoil Springs are optimized for an AEV-spec Gladiator with typical gear inside. This means the ideal ride height, handling and overall performance will be achieved on a vehicle with steel bumpers, winch, full-size spare and recovery gear (+0-400 lbs. over factory weight).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Capacity\u003c\/strong\u003e\u003cspan\u003e Coil Springs are specifically designed for overland enthusiasts who have a fully outfitted vehicle that is also consistently loaded with heavier gear (+400-700 lbs.), such as bed rack\/tent combinations or in-bed campers.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"pastel-selectable-element\"\u003eWhile these 3-inch progressive rate Jeep Gladiator coil springs will work for a lighter-weight vehicle, customers should be aware that it will sit higher than advertised and have a slightly stiffer ride - not excessively harsh or intolerable, but also not nearly as pleasant for daily use as a vehicle within our target weight range.\u003c\/p\u003e\n\u003cp\u003eAEV high-capacity progressive rate coil springs are engine-specific and only sold as a complete set of front\/rear springs in order to preserve the optimal vehicle handling dynamics that our DualSport suspensions provide.\u003c\/p\u003e","brand":"AEV","offers":[{"title":"Gas","offer_id":48700782936321,"sku":"NJT21502AA","price":598.0,"currency_code":"USD","in_stock":true},{"title":"Diesel","offer_id":48700782969089,"sku":"NJT21506AA","price":650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/3-high-capacity-coil-springs-for-gladiator-3.webp?v=1777586352"},{"product_id":"aev-salta-xr-wheel-for-jl-wrangler-jt-gladiator","title":"AEV Salta XR Wheel for JL Wrangler \u0026 JT Gladiator","description":"\u003cp\u003eThe Salta XR represents the evolution of the widely popular Salta. Like its predecessor, the Salta XR’s race-inspired, 12-spoke design provides additional strength for maximum durability on and off-road, while AEV’s signature recessed valve stems provide added protection from rocks on the trail. The AEV Salta XR was designed specifically for the JL Wrangler and JT Gladiator with its proper offset\/backspacing, giving you the perfect balance of tire clearance, scrub radius and handling. It is available in a 17×8.5″ size.\u003c\/p\u003e\n\u003cp\u003eAs with every AEV wheel, the Salta XR has been tested to stringent SAE J2530 standards and features a lifetime structural warranty. Finishes include satin black and onyx – both feature a subtle “SALTA XR” graphic, laser engraved on the face. Manufactured in Italy.\u003c\/p\u003e\n\u003csection class=\"product__features\"\u003e\n\u003cdiv class=\"product__features Grid-cell\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically for JL Wrangler and JT Gladiator\u003c\/li\u003e\n\u003cli\u003eRecessed valve stem for added protection\u003c\/li\u003e\n\u003cli\u003eA356 T6 cast aluminum construction\u003c\/li\u003e\n\u003cli\u003eTested to stringent SAE J2530 standards\u003c\/li\u003e\n\u003cli\u003eMolded AEV Center Cap included\u003c\/li\u003e\n\u003cli\u003eCompatible with Tire Pressure Monitoring System (TPMS)\u003c\/li\u003e\n\u003cli\u003eLifetime structural warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","brand":"AEV","offers":[{"title":"Satin Black","offer_id":48700831727873,"sku":"28401106AA","price":299.0,"currency_code":"USD","in_stock":true},{"title":"Onyx","offer_id":48700831760641,"sku":"28401109AA","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/aev-salta-xr-wheel-for-jl-wrangler-jt-gladiator.webp?v=1777586521"},{"product_id":"aev-savegre-ii-wheel-for-jl-wrangler-and-jt-gladiator","title":"AEV Savegre II Wheel for JL Wrangler and JT Gladiator","description":"\u003cp\u003eThe AEV Savegre II wheel for JL Wrangler and Gladiator puts a modern spin on a classic AEV wheel design. This refreshed version of AEV's original JK Savegre wheel has been updated in a number of ways to accommodate the JL Wrangler\/Gladiator's unique fitment requirements. The Savegre II features a JL\/Gladiator-specific offset of +25mm, which works perfectly with the various OE fender flare styles and provides the optimal balance of tire clearance, scrub radius and handling. Additionally, this AEV Savegre II Wheel features a larger center cap bore (62.77mm) for compatibility with the Jeep JL Wrangler's OE backup camera and resized pockets for the larger factory lug nuts. Available in a Satin Black finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJL Wrangler \/ Gladiator specific fitment\u003c\/li\u003e\n\u003cli\u003eCompatible with Tire Pressure Monitoring System (TPMS)\u003c\/li\u003e\n\u003cli\u003eAccepts OE lug nuts without the need to use thin wall socket\u003c\/li\u003e\n\u003cli\u003eCompatible with the OE backup camera\u003c\/li\u003e\n\u003cli\u003eRecessed valve stem for added protection\u003c\/li\u003e\n\u003cli\u003eA356 T6 cast aluminum construction\u003c\/li\u003e\n\u003cli\u003eTested to stringent SAE J2530 standards\u003c\/li\u003e\n\u003cli\u003eMolded AEV Center Cap included\u003c\/li\u003e\n\u003cli\u003eLifetime structural warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEV","offers":[{"title":"Default Title","offer_id":48700856140033,"sku":"20403011AB","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/savegre-ii-wheel.webp?v=1777586647"},{"product_id":"aev-pintler-wheel-for-jl-wrangler-jt-gladiator","title":"AEV Pintler Wheel for JL Wrangler \u0026 JT Gladiator","description":"\u003cp\u003eThe AEV Pintler wheel for Jeep Wrangler JL\/Gladiator combines timeless styling with the innovative features and off-road strength that you've come to expect from AEV. However, this is not just another one-size-fits-all aftermarket black Jeep Gladiator\/Wrangler JL wheel.\u003c\/p\u003e\n\u003cp\u003eAEV designed the Pintler wheel specifically for the newest Wrangler because despite sharing the same DNA as the Jeep JK Wrangler, many aspects of the latest generation Wrangler and Gladiator are quite different, so simply re-purposing a Pintler wheel for our Wrangler JK was not the best solution. The AEV JL\/Gladiator Pintler wheel's unique offset of +25mm, works perfectly with the various OE fender flare variants and provides the optimal balance of tire clearance, scrub radius, and handling. Additionally, this wheel features a larger center cap bore (62.77mm) for compatibility with the JL Wrangler's OE backup camera and resized pockets for the larger factory lug nuts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJL Wrangler \/ Gladiator specific fitment\u003c\/li\u003e\n\u003cli\u003eCompatible with Tire Pressure Monitoring System (TPMS)\u003c\/li\u003e\n\u003cli\u003eAccepts OE lug nuts without the need to use thin wall socket\u003c\/li\u003e\n\u003cli\u003eCompatible with the OE backup camera\u003c\/li\u003e\n\u003cli\u003eRecessed valve stem for added protection\u003c\/li\u003e\n\u003cli\u003eA356 T6 cast aluminum construction\u003c\/li\u003e\n\u003cli\u003eTested to stringent SAE J2530 standards\u003c\/li\u003e\n\u003cli\u003eMolded AEV Center Cap included\u003c\/li\u003e\n\u003cli\u003eLifetime structural warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEV","offers":[{"title":"Satin Black","offer_id":48700881568001,"sku":"20402034AA","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/pintler-wheel.webp?v=1777586746"},{"product_id":"aev-borah-dualsport-wheel-for-jk-wrangler-jl-wrangler-and-jt-gladiator","title":"AEV Borah DualSport Wheel for JK Wrangler, JL Wrangler and JT Gladiator","description":"\u003cp\u003eThe AEV Borah DualSport Wheel is engineered around how your Jeep is built and used, not a one-size-fits-all compromise. Designed with vehicle-specific offsets and load requirements, the Borah DualSport Wheel delivers OEM-quality handling, proper scrub radius, and true off-road durability—with the flexibility to run standard, protection ring, or full beadlock configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo Optimized Fitments — Engineered with Intent\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+25mm Offset — JL \/ Gladiator Optimized Fitment\u003cbr\u003e\u003c\/strong\u003eThe +25mm Borah is the ideal configuration for JL Wrangler and Gladiator owners running a 2.5–3” AEV DualSport Suspension, 35–37” tires, and OEM fender flares.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with JL Wrangler and Gladiator only\u003c\/li\u003e\n\u003cli\u003eMaintains proper scrub radius and confident steering feel\u003c\/li\u003e\n\u003cli\u003eOptimized tire clearance with factory flare coverage\u003c\/li\u003e\n\u003cli\u003eProven at scale — the same wheel used on AEV JL350\/370 and JT350\/370 conversions\u003c\/li\u003e\n\u003cli\u003eDesigned for balanced on-road manners and off-road capability\u003c\/li\u003e\n\u003cli\u003eAvailable in Onyx, Satin Black and Bronze\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e+0mm Offset — Universal, High-Clearance Fitment\u003cbr\u003e\u003c\/strong\u003eThe +0mm Borah is a more universal fitment, developed for drivers pushing beyond factory proportions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with JL Wrangler\/Gladiator and JK Wrangler platforms\u003c\/li\u003e\n\u003cli\u003eIdeal for larger suspension\/tire combinations that require more backspacing\u003c\/li\u003e\n\u003cli\u003eProvides additional backside clearance for many aftermarket big bore shocks or coilovers\u003c\/li\u003e\n\u003cli\u003eWell-suited for aftermarket fender flares where increased track width is desired\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOnly Available in Satin Black\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eModular Beadlock Flexibility\u003cbr\u003e\u003c\/strong\u003eThe AEV Borah DualSport Wheel is available in multiple configurable setups to match how you drive.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Beadlock Ring:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFully functional beadlock for running very low tire pressures off-road\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Ring:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eIdeal for street use with added protection against trail damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Ring:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eClean, minimalist appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoth the Beadlock Ring and Protection Ring are fully interchangeable, allowing you to run a Protection Ring on the street and upgrade to a functional Beadlock Ring when your build demands it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngineered Fitment. Proven Capability.\u003cbr\u003e\u003c\/strong\u003eBorah DualSport Wheels are designed as part of a complete AEV system — for drivers who expect more than a universal solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHub centric design\u003c\/li\u003e\n\u003cli\u003eAccepts OE lug nuts and\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/aev-conversions.com\/products\/aev-black-lug-nuts\" title=\"AEV Black Lug Nuts\" rel=\"noopener\" target=\"_blank\"\u003eAEV Black Lug Nuts\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eRecessed valve stem for added protection\u003c\/li\u003e\n\u003cli\u003eTPMS Compatible\u003c\/li\u003e\n\u003cli\u003eBoth versions have been tested to stringent DOT\/SAE J2530 standards\u003c\/li\u003e\n\u003cli\u003eMolded AEV Center Cap included\u003c\/li\u003e\n\u003cli\u003eLifetime structural warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEV","offers":[{"title":"Satin Black \/ +25mm \/ Nylon Hardware Kit - Required without Ring +$18.48","offer_id":48701062938881,"sku":"20402544AA","price":329.48,"currency_code":"USD","in_stock":true},{"title":"Satin Black \/ +25mm \/ Onyx Protection Ring +$175","offer_id":48701062971649,"sku":"20402544AA","price":486.0,"currency_code":"USD","in_stock":true},{"title":"Satin Black \/ +25mm \/ Onyx Beadlock Ring + $195","offer_id":48701063004417,"sku":"20402544AA","price":506.0,"currency_code":"USD","in_stock":true},{"title":"Satin Black \/ +25mm \/ Silver Protection Ring +$175","offer_id":48701063037185,"sku":"20402544AA","price":486.0,"currency_code":"USD","in_stock":true},{"title":"Satin Black \/ +25mm \/ Silver Beadlock Ring + $195","offer_id":48701063069953,"sku":"20402544AA","price":506.0,"currency_code":"USD","in_stock":true},{"title":"Satin Black \/ +25mm \/ Satin Black Protection Ring +$175","offer_id":48701063102721,"sku":"20402544AA","price":486.0,"currency_code":"USD","in_stock":true},{"title":"Satin Black \/ +25mm \/ Satin Black Beadlock Ring +$195","offer_id":48701063135489,"sku":"20402544AA","price":506.0,"currency_code":"USD","in_stock":true},{"title":"Satin Black \/ 0mm \/ Nylon Hardware Kit - Required without Ring +$18.48","offer_id":48701063168257,"sku":"20402545AA","price":329.48,"currency_code":"USD","in_stock":true},{"title":"Satin Black \/ 0mm \/ Onyx Protection Ring +$175","offer_id":48701063201025,"sku":"20402545AA","price":486.0,"currency_code":"USD","in_stock":true},{"title":"Satin Black \/ 0mm \/ Onyx Beadlock Ring + $195","offer_id":48701063233793,"sku":"20402545AA","price":506.0,"currency_code":"USD","in_stock":true},{"title":"Satin Black \/ 0mm \/ Silver Protection Ring +$175","offer_id":48701063266561,"sku":"20402545AA","price":486.0,"currency_code":"USD","in_stock":true},{"title":"Satin Black \/ 0mm \/ Silver Beadlock Ring + $195","offer_id":48701063299329,"sku":"20402545AA","price":506.0,"currency_code":"USD","in_stock":true},{"title":"Satin Black \/ 0mm \/ Satin Black Protection Ring +$175","offer_id":48701063332097,"sku":"20402545AA","price":486.0,"currency_code":"USD","in_stock":true},{"title":"Satin Black \/ 0mm \/ Satin Black Beadlock Ring +$195","offer_id":48701063364865,"sku":"20402545AA","price":506.0,"currency_code":"USD","in_stock":true},{"title":"Bronze \/ +25mm \/ Nylon Hardware Kit - Required without Ring +$18.48","offer_id":48701063397633,"sku":"20402046AA","price":329.48,"currency_code":"USD","in_stock":true},{"title":"Bronze \/ +25mm \/ Onyx Protection Ring +$175","offer_id":48701063430401,"sku":"20402046AA","price":486.0,"currency_code":"USD","in_stock":true},{"title":"Bronze \/ +25mm \/ Onyx Beadlock Ring + $195","offer_id":48701063463169,"sku":"20402046AA","price":506.0,"currency_code":"USD","in_stock":true},{"title":"Bronze \/ +25mm \/ Silver Protection Ring +$175","offer_id":48701063495937,"sku":"20402046AA","price":486.0,"currency_code":"USD","in_stock":true},{"title":"Bronze \/ +25mm \/ Silver Beadlock Ring + $195","offer_id":48701063528705,"sku":"20402046AA","price":506.0,"currency_code":"USD","in_stock":true},{"title":"Bronze \/ +25mm \/ Satin Black Protection Ring +$175","offer_id":48701063561473,"sku":"20402046AA","price":486.0,"currency_code":"USD","in_stock":true},{"title":"Bronze \/ +25mm \/ Satin Black Beadlock Ring +$195","offer_id":48701063594241,"sku":"20402046AA","price":506.0,"currency_code":"USD","in_stock":true},{"title":"Bronze \/ 0mm \/ Nylon Hardware Kit - Required without Ring +$18.48","offer_id":48701063627009,"sku":"20402046AA","price":329.48,"currency_code":"USD","in_stock":true},{"title":"Bronze \/ 0mm \/ Onyx Protection Ring +$175","offer_id":48701063659777,"sku":"20402046AA","price":486.0,"currency_code":"USD","in_stock":true},{"title":"Bronze \/ 0mm \/ Onyx Beadlock Ring + $195","offer_id":48701063692545,"sku":"20402046AA","price":506.0,"currency_code":"USD","in_stock":true},{"title":"Bronze \/ 0mm \/ Silver Protection Ring +$175","offer_id":48701063725313,"sku":"20402046AA","price":486.0,"currency_code":"USD","in_stock":true},{"title":"Bronze \/ 0mm \/ Silver Beadlock Ring + $195","offer_id":48701063758081,"sku":"20402046AA","price":506.0,"currency_code":"USD","in_stock":true},{"title":"Bronze \/ 0mm \/ Satin Black Protection Ring +$175","offer_id":48701063790849,"sku":"20402046AA","price":486.0,"currency_code":"USD","in_stock":true},{"title":"Bronze \/ 0mm \/ Satin Black Beadlock Ring +$195","offer_id":48701063823617,"sku":"20402046AA","price":506.0,"currency_code":"USD","in_stock":true},{"title":"Onyx \/ +25mm \/ Nylon Hardware Kit - Required without Ring +$18.48","offer_id":48701063856385,"sku":"20402540AA","price":329.48,"currency_code":"USD","in_stock":true},{"title":"Onyx \/ +25mm \/ Onyx Protection Ring +$175","offer_id":48701063889153,"sku":"20402540AA","price":486.0,"currency_code":"USD","in_stock":true},{"title":"Onyx \/ +25mm \/ Onyx Beadlock Ring + $195","offer_id":48701063921921,"sku":"20402540AA","price":506.0,"currency_code":"USD","in_stock":true},{"title":"Onyx \/ +25mm \/ Silver Protection Ring +$175","offer_id":48701063954689,"sku":"20402540AA","price":486.0,"currency_code":"USD","in_stock":true},{"title":"Onyx \/ +25mm \/ Silver Beadlock Ring + $195","offer_id":48701063987457,"sku":"20402540AA","price":506.0,"currency_code":"USD","in_stock":true},{"title":"Onyx \/ +25mm \/ Satin Black Protection Ring +$175","offer_id":48701064020225,"sku":"20402540AA","price":486.0,"currency_code":"USD","in_stock":true},{"title":"Onyx \/ +25mm \/ Satin Black Beadlock Ring +$195","offer_id":48701064052993,"sku":"20402540AA","price":506.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/20402046_NHRDWR.webp?v=1777586896"},{"product_id":"aev-front-bumper-skid-plate-for-aev-ex-rx-front-bumper","title":"AEV Front Bumper Skid Plate for AEV EX\/RX Front Bumper","description":"\u003cp\u003eAEV's Front Skid Plate for JL\/Gladiator is not only good looking, but protects your sway bar, impact beam, and steering as well. Manufactured out of Hot Stamped Boron Steel (HSBS), the Front Skid Plate is designed to work with both our RX and EX Front Bumpers. It has two dedicated lift points for a Hi-Lift Jack that holds the tongue in place beneath the bumper safely and prevents the jack from sliding sideways during use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5mm thick stamped Hot Stamped Boron Steel (HSBS)\u003c\/li\u003e\n\u003cli\u003eTextured black powdercoat finish\u003c\/li\u003e\n\u003cli\u003eProtects vital components\u003c\/li\u003e\n\u003cli\u003eCompatible with AEV EX and RX Front Bumpers only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEV","offers":[{"title":"Default Title","offer_id":48701318922497,"sku":"12301050AA","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/front-bumper-skid-plate-2.webp?v=1777588688"},{"product_id":"jeep-gladiator-mountain-hatch-19-26","title":"Jeep Gladiator Mountain Hatch | 19-26","description":"\u003cp\u003e\u003cspan\u003eThe Original Patented Food Grade Tailgate Table Since 2018\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Mountain Hatch can serve as a table whether tailgating, camping or if you just want to set that hot cocoa down. This product is a heavy-duty FDA approved 1\/2 inch plastic with UV inhibitors. Like a cutting board, it is also food safe. The Mountain Hatch is made right here in the USA.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Mountain Hatch is designed for abuse. Can handle dirt bikes, snow mobiles or anything you can throw at it. It's the ultimate camp table that can double as a tailgate protector.  \u003c\/span\u003e\u003c\/p\u003e","brand":"Mountain Hatch","offers":[{"title":"Black \/ Recessed Pocket Version","offer_id":49221072617729,"sku":null,"price":249.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ Original Flat Version","offer_id":49221072650497,"sku":null,"price":249.0,"currency_code":"USD","in_stock":true},{"title":"Orange \/ Recessed Pocket Version","offer_id":49221072683265,"sku":null,"price":249.0,"currency_code":"USD","in_stock":true},{"title":"Orange \/ Original Flat Version","offer_id":49221072716033,"sku":null,"price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/files\/RANGERGLADIATORCOLORADO0521FRONTIER_d5314e89-4cc1-4455-8a8c-790a3e15695b.png?v=1780336417"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/4053\/5041\/collections\/RED_JL_03720ef7-fddd-4198-afd8-ffad007b12bd.webp?v=1777584602","url":"https:\/\/atlasoffroadco.com\/collections\/aev-gladiator-jt350-jt370-parts-accessories.oembed","provider":"Atlas Offroad ","version":"1.0","type":"link"}