DuroBumps Premium Off Road Rear Bump Stops for 24+ Tacoma, 22+ Tundra, Land Cruiser 250 & 300, Lexus GX550 & LX600 (4-Inches Tall) – DBRTOY4
Experience the difference with DuroBumps premium off-road bump stops, proudly made in the USA. These extended Tundra rear bump stops feature dual durometer rubber, providing smooth, progressive dampening that significantly reduces hard bottom-outs. Unlike OEM bump stops that can feel rock-hard on contact. As a result, you’ll enjoy enhanced off-road control and comfort while eliminating the “shell-shock” effect when encountering larger bumps.
Enhance your vehicle’s suspension with DuroBumps extended Tundra Rear Bump Stops, designed for multiple Toyota and Lexus models. DBRTOY4 are extended 1-Inch for 2023+ Sequoia, 2022+ Tundra, Land Cruiser 300, and Lexus LX600, and 2-inch extended for 2024+ Toyota Tacoma, Land Cruiser 250 and Lexus GX550.
Aftermarket bump stops are a great suspension upgrade. They are easily installed in the OEM location with basic hand tools and provided hardware. Once installed, DuroBumps will protect your shocks from over compression and bottoming out. Which can damage or destroy your trucks shocks and other suspension components, both on and off the trail. By absorbing shock loads they also increase maintenance intervals therefore reducing wear on suspension components. DuroBumps are designed to be slightly taller than the OEM bump stops and compress under load providing smooth, progressive dampening that will not limit wheel up travel.
If you’re seeking improved off-road control, performance, and comfort for your Toyota truck, DuroBumps are the perfect solution.
Don’t wait; Experience the DuroBumps Difference and elevate your off-road performance today!
Features & Benefits
Why DuroBumps DBRTOY4 Rear Bump Stops?
- Improved Handling – Our dual durometer rubber enables DuroBumps to act as a secondary coil spring, ensuring smooth engagement that progressively increases compression load in a predictable manner.
- No Loss of Up-Travel – DuroBumps DBRTOY4 maintains factory suspension/wheel up travel.
- Mounts in OEM Location – Bolts effortlessly into preexisting OEM mounting location. Ensuring a proper fit – No spacers or modifications needed.
- Increased Suspension Life – Actively absorbs shock load and prevents suspension from bottoming out, therefore extending the service life of other components, and reducing maintenance costs.
- Compact, Application-Specific Design – Designed to fit specific truck models with no “universal fit” or spacers required. All without excessive free height interfering with your shocks’ valving.
- Silent Engagement – Unlike Hydro bumps, DuroBumps make no noise upon contact.
- Premium Quality – DuroBumps Premium Bump Stops are Proudly manufactured in the USA, using top-grade raw materials, ensuring exceptional durability and strength.
- Provided Mounting Hardware – Powder-coated steel standard mounting plates and JIS 10.9 zinc-coated hex head metric bolts for a strong, secure fit.
What's Included
(2) Two Premium rear bump stops.
(2) Two standard mounting plates
(1) One Hardware pack
(1) One FREE sticker
Installation Instructions
Step 1: Following the vehicle manufacturer’s recommendations, use a properly rated jack and jack stands. Lift the rear of
the truck with the floor jack and support the vehicle using jack stands. Remove the rear wheels.
Step 2: Remove the OEM bump stop located on the frame rail above the rear axle tube using a 12mm deep socket. There
are three bolts securing each bump stop.
Step 3: Use a scraper or wire brush to clean any mud or debris from the frame.
Step 4: Assemble the rubber bump stop to the metal bracket using the provided flat head screws. Fasten the screws with
the supplied Allen wrench until snug. Do not overtighten.
Step 5: Mount the DuroBumps bump stop in the OEM location on the frame rail. Insert the bolts into the factory holes and
tighten them using a 12mm socket wrench until snug. Do not overtighten.
Step 6: Repeat steps 2–5 on the other side of the vehicle.
Step 7: Reinstall the wheels and lower the vehicle back to the ground. Torque the lug nuts to factory specifications.
Vehicle Applications
2022 – 2025 Toyota Tundra 3rd Gen (Extended 1-inch)
2024 – 2025 Toyota Landcruiser 250 (Extended 2-inch)
2024 – 2025 Lexus GX550 (Extended 2-Inch)
2023 – 2025 Toyota Sequoia 3rd Gen (Extended 1-inch)
2024 – 2025 Toyota Tacoma 4th Gen with 4-link (Extended 2-inch)
2024 – 2025 Toyota Tacoma 4th Gen with Leaf Pack (Extended 1-inch)
2021 – 2024 Landcruiser 300 (Extended 1-inch)
2022 – 2025 Lexus LX600 4th Gen (Extended 1-inch)
Lift Height Required
1 Inch Lift Required. 1-2 inch+ Lift
Deflection (Compression)
.75 in. @ 1500LBS.
Disclaimer:
Note: For off-road use only. By installing these aftermarket bump stops, the user assumes all risk and liability. DuroBumps are not designed for towing applications. For more information, click here. The seller will not be held liable for any damage or loss associated with the installation or use of this product for any reason.
Color: Black
